Syntax: radius-server host < ip-address > key <server-specific key-string>
[no] radius-server host < ip-address > key
Optional. Specifies an encryption key for use during
authentication (or accounting) sessions with the speci
fied server. This key must match the encryption key used
on the RADIUS server. Use this command only if the
specified server requires a different encryption key than
configured for the global encryption key, above.
The no form of the command removes the key configured
for a specific server.
For example, to configure the switch to access a RADIUS server at IP address
192.168.32.11 using a server specific shared secret key of '1A7rd'
Figure 3-4.Example of Configuring a Switch To Access a RADIUS
Server
Web and MAC Authentication
Configuring the Switch To Access a RADIUS Server
3-15