Telephone Functions - LEGRAND SecurityConfig 5739 35 User Manual

SecurityConfig

7.4.3 Telephone functions

This screen displays the telephone functions that can be customized.
It is possible to change all functions in the procedures described hereinafter.
Enables/disables the dialling device to make telephone calls.
> Select Yes/No from the drop-down menu
If this function will be disabled and if a protocol (Portal or ADEMCO) is active, the following message
will appear:
> Click the Yes button
The function is now "Enabled for outgoing calls" and the "Portal" service is disabled.
Sets the number of rings, after which the dialling device answers a call.If there's an answering machine,
the number of rings shall be higher than the one set for the answering system.
> Select the number of rings from the drop-down menu
Determines the number of times the dialling device will repeat calls to the numbers from which it did
not receive an answer.
> Select the number of cycles from the drop-down menu
40