LAMAX Dots1 - Wireless in-ear Headphones User Guide

Overview

1. Charging Station
2. Charging Station LED indicator
3. Multi-function button with LED indicator

Controls

Earphones

Power On / Off

The earphones switch on automatically when they are removed from the charging station. A white LED lights up for one second on the earphone and a beep sounds.
When switched on, the earphones automatically connect to each other. The left earphone functions as the "Master".
To turn off both earphones, press and hold the multi-function button on the left "Master" earphone for 4 seconds. A white LED lights up on the earphone for 1 second and a beep sounds. The left "Master" earphone switches off and the right earphone switches off automatically.
If you only use one earphone, press and hold the multi-function button for 4 seconds to switch it on or off.
The earphones are automatically switched off when inserted into the charging station. The white LED on the earphones lights up until the earphones are charged and then switches off.
If the earphones are not paired with a Bluetooth device, they switch off automatically after 10 minutes to conserve battery power.

Pairing

The distance from your device to the earphones should not exceed one metre when pairing.

Pairing both earphones

1. Take the earphones out of the charging station and remove the protective labels. The earphones automatically connect to each other and a "Left channel / Right channel" voice message is heard.
2. Press and hold the multi-function button on both earphones for 2 seconds at the same time. The earphones switch on and automatically connect to each other. After connecting, the left "Master" earphone goes into pairing mode. Pairing mode is indicated by alternate flashing of the white and blue LEDs on the earphones. The right earphone is in standby mode and the white LED on it flashes once every 7 seconds. Activate Bluetooth on your device and set up a new Bluetooth device. Select "LAMAX Dots1" from the list of found devices. After successful pairing, a beep sounds. When the second earphone is paired automatically, you hear the notification "Second device connected".

If the pairing of the earphones has not worked properly, please turn off both earphones. Then press and hold the multi-function button on both earphones for 4 seconds until the white and blue LEDs flash alternately. The earphones automatically connect to each other and the blue LED flashes twice every 2 seconds. The "Left channel / Right channel" voice message is heard. Continue from step 2.
If the headphones are not paired with each other, turn them off, insert them into the charging station and press the multifunction button twice on the left handset and then twice on the right. The headphones will then pair with each other.

Pairing one earphone
To turn on the earphone, press and hold the multi-function button for 4 seconds until the beep sounds and the white and blue LEDs flash alternately.
Activate Bluetooth on your device and set up a new Bluetooth device. Select "LAMAX Dots1" from the list of found devices.
After successful connection, the white LED flashes once every 7 seconds.

Charging

To charge using the charging station, connect the cable to the Micro USB port on the back of the charger and plug the other end of the cable into a USB power supply with a maximum voltage of 5V. The flashing blue LED on the charging station indicates its charging status. At full charge, the blue LED lights up.
The charging time for the earphones is approximately 2 hours. The white LED on the earphones remains on until the earphones are charged and switches off when they are fully charged. When removing the earphones from the charging station while charging, the earphones automatically switch on.

Main Features

• Cable-free, wireless transfer via Bluetooth 5.0
• Automatic pairing between earphones
• Lightweight earbuds with minimalistic "invisible" design
• Pure, rich sound across the entire frequency range
• Ability to charge the battery while in motion using the charging station
• Hands free calling
• Control music and calls directly on the earphones
• 3 earplug sizes and ear hooks come as part of the package

Parameters