Lubricants And Capacity - LS tractor MT225E Operator's Manual

5-3. Lubricants and Capacity

Lubricants
Engine coolant
Fuel
Engine oil
Transmission oil
(common use for
hydraulic lift and
steering system)
Front axle oil
Grease
(Front axle holder,
Steering cylinder pin,
3-point linkage, etc.)
RECOMMENDED ENGINE OIL VISCOSITIES
The correct engine oil viscosity grade is dependent upon ambient temperature. Refer to the below
chart when selecting engine oil for your tractor.
In areas where prolonged periods of extreme temperatures are encountered, local lubricant practices
are acceptable; such as the use of SAE 5W 30 in extreme low temperatures or SAE 50 in extreme high
temperatures.
Ambient -30
Temperature (-22)
℃(℉)
Oil
Viscosity
Capacity
4.9 L
(1.3 U.S.gals.)
28 L
(7.4 U.S.gals.)
4.2 L
(1.1 U.S.gals.)
32 L
(8.5 U.S.gals.)
6.5 L
(1.7 U.S.gals.)
Proper
amount
-25 -20 -15
(-13) (-4) (5) (14)
SAE 5W-20
5 - 17
International Standard
ASTM D6210
ASTM D975 No.2
API CF-4 or CH-4
API GL4
ISO VG 32/46
API GL4
SAE 80W
NLGI 2
-10 -5 0 10
(23) (32) (50)
SAE 10W-30
SAE 15W-40
Recommended
products
Soft water (50%) +
Anti-freeze (50%)
Ultra low sulfur
diesel fuel
KIXX DL
(Manufacturer :
GS Caltex)
LSTH400G
(Manufacturer :
GS Caltex)
EPK 80W90
(Manufacturer :
S-OIL TOTAL Co. Ltd.)
MAHWAK Multi
purpose or MAHWAK
All purpose (Caltex)
20 30 40
(68) (86) (104)