After I Connect My Clié Handheld To My Computer, The Drive; Operation Becomes Unstable When Connected To My Computer; The Error Message "Unsafe Removal Of Device" Suddenly; Appears On My Computer Window - Sony CLIE PEG-UX40 Frequently Asked Questions Manual

After I connect my CLIÉ handheld to my computer, the
drive is recognized but the contents cannot be found
B Reconnect your CLIÉ handheld to your computer after inserting a
"Memory Stick" media.
Operation becomes unstable when connected to my
computer
B If you connect your CLIÉ handheld to your computer via a USB hub or
extension USB cable, you may not be able operate your CLIÉ handheld
properly. Make sure you connect the USB cable directly to a USB port of
your computer.

The error message "Unsafe Removal of Device" suddenly

appears on my computer window

B Do not disconnect your CLIÉ handheld from your computer or tap [Exit]
during check in/check out (sending music).

Other problems

My CLIÉ handheld does not produce any sound
B If you connect the headphones to your CLIÉ handheld, the system sound
of your CLIÉ handheld, the alarm sound and the game sound can be heard
only through the headphones.
B Check that the volume is not set to Muting mode.
I cannot insert a "Memory Stick" media into my CLIÉ

handheld

B Insert the "Memory Stick" media in the correct direction.
b
For details, refer to "CLIÉ
media" in the supplied "Read This First (Operating Instructions)".
™
handheld components: Using "Memory Stick"
Continued on next page
43