Related Manuals for Living Spaces LUCA Y2103W-347
Summary of Contents for Living Spaces LUCA Y2103W-347
- Page 1 ASSEMBLY INSTRUCTIONS LUCA 3 DRAWER PANEL/BUNK/DAYBED UNDERBED STORAGE SKU: 314670 ITEM NO: Y2103W-347 314582 Y2103B-347 314626 Y2103G-347 5 min...
- Page 2 Revert the knob as instruction That's it ! You've finished assembling your item. Thank you!
- Page 3 ASSEMBLY INSTRUCTIONS LUCA TWIN-FULL BUNK BED ITEM NO: Y2103W-340/343/344 SKU:314663/314666/314667 Y2103B-340/343/344 314575/314578/314579 Y2103G-340/343/344 314619/314622/314623 30 min...
- Page 4 Ensure thickness of mattress does not exceed 6" and mattress is at least 5" below upper edge of guardrails. Ensure thickness of mattress does not exceed 6" for lower bunk. REPLACEMENT PARTS Replacement parts, including additional guardrails, may be requested from Living Spaces, usually at a cost.
- Page 5 Always use the ladder or Stairway Chest for entering and leaving the upper bunk. You will buy ladder/Stairway as options.
-
Page 6: Description Qty
BOX 1-TW /TW + TW /FL UPPER ENDS/SLATS BUNK BED PART SKU# IMAGE DESCRIPTION 1987TF-A-W: (White) Upper Ends 1987TF-A-B: (Blue) 1987TF-A-G: (Grey) Upper Slats 1987TF-J BOX 2-TW /FL + FL/FL LOWER ENDS/SLATS BUNK BED PART SKU# IMAGE DESCRIPTION 1987TF-B-W:(White) 1987TF-B-B:(Blue) Lower Ends 1987TF-B-G:(Grey) B(L) - Page 7 BOX 3-TW /FL SIDE/GUARD RAILS/SLAT SUPPORT BUNK BED PART SKU# IMAGE DESCRIPTION 1987TF-C-W:(White) Upper Rails 1987TF-C-B:(Blue) 1987TF-C-G:(Grey) 1987TF-D-W:(White) Guard rails 1987TF-D-B:(Blue) 1987TF-D-G:(Grey) 1987TF-E-W:(White) Guard rail 1987TF-E-B:(Blue) supports 1987TF-E-G:(Grey) 1987TF-F-W:(White) Lower 1987TF-F-B:(Blue) back rail 1987TF-F-G:(Grey) Lower 1987TF-G-W:(White) 1987TF-G-B:(Blue) Front Rail 1987TF-G-G:(Grey) Slat support 1987TF-H...
-
Page 8: Cleaning Instructions
Hardware List of Luca Twin-Full Bunk Bed IMAGE DESCRIPTION Part SKU# 1987TF-1(16) Bolt and nut M8*90mm 1987TF-2(6) Bolts M8*35mm Screws Ø6.5*83mm 1987TF-3(8) 1987TF-4(16) Dowel Ø8*40mm 1987TF-5(28) Screws 8#*30mm 1987TF-6(4) Metal dowel Ø10*100mm 1987TF-7(1) Allen key 60*22*4mm 1987TF-8(4) Sticker Note: Screwdriver will be prepared by yourshelf. THE HARDWARE IS LOCATED IN THE PACKING ITEM NOTE: MUST TIGHTEN SCREWS PERIODIACLLY. - Page 9 Detail view B(R)
- Page 10 STEP 1: Assembly Rail (C): Please locate two rails (C) to Ends (A) by Dowel (4) firstly, and then fasten gradually by Bolt+nut (1) BUT NO TIGHTEN. Assembly Guard Rail (D): Please locate Guard rails (D) to Ends (A) by Dowel (4) firstly, and then fasten gradually by Bolt (3).
- Page 11 STEP 3: Please fasten slats (J ) by screw (5) into corresponding holes. 5=14Pcs STEP 4: Insert dowels (4) to Ends (B) firstly, the Rails (F) and (G) are fastened by Bolt+nut (1). Pay attention to rail orientation . Distinguishing Back Rail (F) and Front Rail (G)! 4=4Pcs 1=8Pcs...
- Page 12 STEP 5: Place the slat support (H) to the Lower bed frame. STEP 6: Please fasten slats (I) by screw (5) into corresponding holes. 5=14Pcs...
- Page 13 STEP 7: Assemble the upper bunk to lower bunk by Metal dowel (6). 6=4Pcs...
- Page 14 Combining with Ladder ( Option 1) Attaching the ladder to Guard rail by Screw and to Lower Side Rail by bolt (these hardware are included in Ladder box). Notice: Using the color stickers (8) to fill the empty holes on frames. 8=4Pcs...
- Page 15 Combining with Stairway Chest ( Option 2). Please attach the Stairway Chest to Bunkbed by metal bracket and screw ( these hardware are included in Stairway box). Please place Stairway Chest is next to Bunkbed Side and wall.
- Page 16 Option 1: Option 2: That's it ! You've finished assembling your item. Thank you!
Need help?
Do you have a question about the LUCA Y2103W-347 and is the answer not in the manual?
Questions and answers