Setting The Box Id At The Terminal Box - Siemens SIMATIC HMI 177 Operating Instructions Manual

4.2.4

Setting the box ID at the terminal box

Introduction
You can set a unique box ID for station identification in each terminal box. If configured
correspondingly, the box ID can be read out of the HMI device and transmitted to the
controller.
Rotary encoder switch
The following figures show the position of the two rotary encoder switches in the terminal
box:
Figure 4-4
Figure 4-5
①
Mobile Panel 177 (WinCC flexible)
Operating Instructions (Compact), Edition 07/2005
Terminal Box DP
Terminal Box PN
Rotary encoder switch
Mounting and Connection
4.2 Connecting the terminal box
4-7