Advertisement
Available languages
Available languages
always b efollowed toreduce t herisk
offire, e lectric s hock, andpersonal
injury, including thefollowing:
Toreduce r isk ofinjury:
Before a nyuse, b esure everyone
using thiselectric p roduct reads a nd
understands
allsafety a nd operation
instructions contained inthismanual.
Save these instructions and review
frequently prior t ouse.Store inwalt
charger slot.
AVOID
DANGEROUS
ENVIRONMENTS
and weather
conditions when using this tool.
KEEP CHILDREN
AWAY - All
visitors should be kept at a safe
distance from work area.
STORE IDLE UNIT INDOORS - When
not in use, the unit should be stored
indoors in a dry location - out of reach
of children.
DON'T FORCE THE TOOL - It will do
the job better and with tess likelihood
of a risk of injury at the rate for which it
was designed.
USE RIGHT TOOL - Do not use the
tool for any job except that for which it
is intended.
WARNING:
KEEP HANDS AND ALL
BODY PARTS AWAY from the blades.
The blade edges are sharp and can
cause injury even when the toot is
OFF.
DRESS PROPERLY - Do not wear
loose clothing or jewelry. They can
be caught in moving parts. Use of
gloves and substantial footwear is
recommended
when working out-
doors. Wear protective hair covering to
contain long hair.
DON'T OVERREACH
- Maintain
proper footing and balance at all
times. Use both hands to operate unit
safely.
USE SAFETY GLASSES
- Always
wear proper eye protection, and use a
face or dust mask if operation is dusty.
MAINTAIN
UNIT WITH CARE - Keep
the unit clean for best performance
and to reduce the risk of injury. Follow
instructions for service. Keep handles
dry, clean, and free from oil and
grease.
UNINTENTIONAL
STARTING -
Don't carry any tool while holding the
switch area. The unit is shipped partly
charged, and may start inadvertently
if
not handled properly.
CHECK DAMAGED
PARTS - If any
component
of the system experiences
a hard impact, check that no parts
were damaged and verify that the
unit operates properly. Check for
misalignment
or bending of moving
parts, breakage of parts, and any
other condition that may affect
operation. A part that is damaged
should be properly repaired or re-
placed by an authorized service
center.
STAY ALERT - Watch what you are
doing. Use common sense. Do not
operate the tool when you are tired.
DON'T GRASP THE EXPOSED
CUTTING BLADES
of the hedge
trimmer or pole saw when picking up
or holding the unit. Do not attempt to
remove cut material nor hold material
to be cut when blades are moving.
Make sure the unit's switch is off and
the battery pack is removed before
clearing jammed material from blades.
DON'T GRASP MOVING LINE of the
line trimmer. Do not attempt to remove
cut material or hold material to be cut
when the line is moving. Make sure
the unit's switch is off and the battery
pack is removed before clearing or
changing line.
ATTACH LINE GUARD ON LINE
TRIMMER ATTACHMENT
- Before
use, attach the line guard correctly.
Advertisement
