Inateck KB05111 - Bluetooth 5.0 Keyboard Cover for Surface Pro Manual

Power ON/OFF KB05111

Power ON: Toggle the switch to ON.

Power OFF: Toggle the switch to OFF.

Pair KB05111 with a Surface Pro

Step 1: For the first time you pair KB05111 with a Surface Pro, you just need to toggle the switch on the KB05111 to "ON" position and KB05111 will enter Bluetooth pairing mode automatically. To enter this mode, you can also hold the simultaneously for 3 seconds and then the blue indicator will flash to indicate that KB05111 is under pairing mode.

Step 2: On the Surface Pro, select All Settings - Devices - Add Bluetooth or Other Device – Bluetooth and then "Inateck KB05111" will show up as an available device.

Step 3: Select "Inateck KB05111" on Surface Pro.

Step 4: When the blue indicator keeps on, it means that KB05111 is paired with the Surface Pro successfully.

Note:
If KB05111 doesn't work even though the blue indicator stays on, it might have been paired with other nearby computer. In this case, please follow steps in "Troubleshooting in Bluetooth Pairing" to resolve the issue.

Troubleshooting in Bluetooth Pairing

Step 1: Delete all the Bluetooth pairing records related to KB05111 on the Surface Pro.

Step 2: Hold simultaneously for 5 seconds. The 3 indicators will flash 3 times simultaneously and then the blue indicator will flash, which means that the keyboard enters Bluetooth pairing mode. Under this mode please re-pair the keyboard with the Surface Pro.

LED Indicator

Indicator	Status	Meaning
: Red	Flash	Battery volume ≤ 20% and not in charge
	Always on	Battery volume ≤ 80% and being charged
: Green	Always on	Battery volume >20% and not in charge
		Battery volume >80% and being charged
A : Green	Always on	Caps Lock On
	Off	Caps Lock Off
: Blue	Always on	Bluetooth Connected
	Off	Bluetooth Not Connected
	Flash	Bluetooth Pairing/re-paring

Note: "Flashing" means the light flashes 3 times a second.

Keyboard Backlight

1. Press + simultaneously to adjust the color of the backlight. There are 7 colors available in total.
2. Press + simultaneously to adjust the brightness of the backlight. There are 3 levels of brightness to choose from.

Note:

1. When the battery level is lower than 15%, the backlight turns off automatically.
2. The backlight will go off automatically if the keyboard is left idle for two minutes. You can wake it up by pressing any key.

Function Keys

How to Use F1-F12

You may press the keys to enable/disable the Fn lock. A repeated operation can unlock the Fn key. (The keyboard disables the Fn key lock by default. )

Press to enable/disable the Fn lock,

When the Fn lock is enabled:

Press can trigger the functionality owned by F1 key;

Press the combination of to dim the brightness of the screen;

This method applies to all F Keys (F1-F12).

When the Fn lock is disabled(Default Status):

Press the combination can disable the Fn lock.

Press the key to dim the brightness of the screen. Press the simultaneously to use the functionality owned by F1 key.

Fn+Key Combinations

	Check the Battery Level
	Turn on/off Touch Pad
	Enter Bluetooth Pairing Mode
	Enable/Disable Fn Lock

Restore Factory Setting

If you are unsure what settings you have made on KB05111, you may restore the factory setting.

To do that, hold simultaneously for 5 seconds.

Note: After factory reset, all settings including the Bluetooth pairing on KB05111 will be set to the original status.

Check Battery Level

Press simultaneously to check the battery level when KB05111 is not being charged.

Charging

When the battery level is under 20%, the red indicator will flash. Please recharge the KB05111 in time. The recommended charging voltage and current are 5V and 250mA respectively. To charge KB05111, you can connect the USB cable to the charger of a cellphone or the USB port of a computer. The keyboard will be fully charged after 4~5 hours.

Note: It is not recommended to charge KB05111 with a fast charger.

Sleeping Mode

1. When KB05111 is left idle for 2 minutes, its backlight becomes off.
2. When KB05111 is left idle for 2 hours, it goes into deep sleep mode. The Bluetooth connection will be disrupted. The connection recovers if you press any key on KB05111.

Note:

1. To wake up the keyboard from sleep, please press any key. Tapping the trackpad cannot wake it up.
2. Suppose that you need to adjust the time interval the backlight goes off and that the keyboard enters sleep mode, please feel free to reach out to our customer service. We can provide you with firmware upgrade service as per your needs.

Product Specification

Packing list

KB05111 *1
Type-C Charging Cable *1
User Manual *1

Manufacturer
Shenzhen Licheng Technology Co., Ltd.
Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian Street,
Longgang District, Shenzhen, Guangdong, China