Table of Contents
Advertisement
Cleaning function
en
When the cooking compartment has cooled down,
remove the brown or white residue with water and a soft
sponge.
When the appliance is running, reddish spots
Note:
form on the surfaces. This is not rust, but residue from
food. These spots are not harmful and do not impair the
cleaning ability of the self-cleaning surfaces.
Top oven
Refer to the information in the relevant section.
~ "Cleaning function" on page 20
Keeping the appliance clean
Always keep the appliance clean and remove dirt
immediately so that stubborn deposits of dirt do not
build up.
:
Warning – Risk of fire!
Loose food remnants, fat and meat juices may catch
fire. Before using the appliance, remove the worst of the
food remnants from the cooking compartment, heating
elements and accessories.
Tips
Clean the cooking compartment after each use. This
■
will ensure that dirt cannot be baked on.
Always remove flecks of limescale, grease, starch
■
and albumin (e.g. egg white) immediately.
Use the universal pan for baking very moist cakes.
■
Use suitable ovenware for roasting, e.g. a roasting
■
dish.
20
.Cleaning function
T he cleaning function is used to clean the self-cleaning
C l e a n i n g f u n c t i o n
surfaces in the cooking compartment.
The self-cleaning surfaces (back panel, ceiling panel
and side panels) are coated with a porous, matt
ceramic material. This coating absorbs and breaks
down splashes from baking, roasting and grilling while
the oven is in operation. If the surfaces no longer clean
themselves adequately and dark patches appear, the
surfaces can be cleaned by the cleaning function.
Before running the cleaning function
Remove shelves, rails, accessories and ovenware from
the cooking compartment.
Cleaning the cooking compartment floor and the
inside of the appliance door
Remove the worst dirt from the cooking compartment
floor, the inside of the appliance door and the interior
lighting. Otherwise, patches will appear that can no
longer be removed.
Caution!
Do not use oven cleaner on the self-cleaning surfaces.
This will damage the surfaces. If oven cleaner does get
onto these surfaces, dab it off immediately using water
and a sponge cloth. Do not rub the surface and do not
use abrasive cleaning aids.
:
Warning – Risk of burns!
; The appliance becomes very hot on the outside
during the cleaning function. Never touch the appliance
door. Allow the appliance to cool down. Keep children
at a safe distance.
Setting the cleaning function
Make sure you follow all the preparation instructions
before setting the cleaning function.
Use the function selector to set the cleaning
1.
function {.
Turn the temperature selector to cleaning setting Ž.
2.
Switch off the appliance after 60 minutes.
3.
You can also set the timer to remind you after
Note:
60 minutes.
Ventilate the kitchen while the cleaning function is
running.
Delaying the end time
You can delay the end time if required. Before starting,
touch the v button until the "End" symbol is highlighted
on the display. Use the @ button to delay the end time.
The appliance will switch to standby after it is started.
Advertisement
Table of Contents
