Mission Critical Wireless - Bluetooth; Turning The Bluetooth On - Motorola APX 6000 User Manual

The display shows momentary the name of the
current site and its corresponding received signal
strength indicator (RSSI).
Changing the Current Site
Press and hold down the preprogrammed Site
Displ/Srch button.
You hear a tone and the display shows
momentary SCANNING.
When the radio finds a new site, it returns to the
Home screen.

Mission Critical Wireless - Bluetooth

This feature allows your radio to extend its
functionality by connecting to external proprietary
Motorola accessories.
Note: It is recommended to use Motorola proprietary
Mission Critical Wireless (MCW) devices with APX
radios during Mission Critical operations as other
®
Bluetooth devices may or may not meet the mission
critical standard.
Your radio must be preprogrammed to allow you to
use this feature.
66
English
The use of this feature requires the "Full Feature"
expansion board together with the Bluetooth
Software.
The default setting for Bluetooth-enabled radio is
Bluetooth ON. See
67 to turn the Bluetooth OFF.
Currently your radio supports the following Bluetooth
devices or profiles.
• Headset (HSP)
• Dial Up Networking (DUN)
• Personal Area Networking (PAN)
®
-
• Serial Port (SPP)

Turning the Bluetooth On

Turning the Bluetooth on via the preprogrammed
button:
a) Press the preprogrammed button to turn on the
Turning the Bluetooth Off
Bluetooth.
You hear a short, medium-pitched tone. The
display shows momentary BT ON, and
appears.
If Bluetooth fails to launch, the display shows
BT ON FL.
on page