DS4.0 CAUTION NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: SHOCK HAZARD. AVIS: RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR. CAUTION: REPLACE FUSE WITH SAME TYPE AND RATING. ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MÊME TYPE. DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE.
DS4.0 Introduction High efficiency Class D design. Active subwoofer amplifier. Power output 400 Wrms into 4 ohms. Crossover filter, 18dB/octave. Subsonic-filter 12Hz, 24dB/octave. - 4 -...
DS4.0 The DS 4.0 is a state-of-the-art Class D amplifier module for active subwoofer use. Accurate rendition of the low bass range is a substantial component of a high-quality music reproduction. For an impressive bass rendition large loudspeakers are unfortunately inevitable.
DS4.0 Technical Data Continuous output power (8 Ohm) 210 Watts Continuous output power (4 Ohm) 400 Watts Gain 44dB Input sensitivity 0,25Vrms Subsonic-filter 12Hz / -3dB, 24dB/Octave Phase 0° - 180°, 180° - 360° Crossover frequency subwoofer 30Hz - 120Hz, 18dB/Octave Bassboost 20Hz - 50Hz Bassboost level...
Page 8
LIFE SUPPORT POLICY: Use of Hypex products in life support equipment or equipment whose failure can reasonably be expected to result in injury or death is not permitted except by explicit written consent from Hypex Electronics BV. - 8 -...
Need help?
Do you have a question about the DS Series and is the answer not in the manual?
Questions and answers