Page 1
ASSEMBLY INSTRUCTIONS WIN LOFT BED WITH SLIDE If you have any questions, please feel free to contact us. Email: service@qualfurn.net WF286078 PAGE 1 OF 12...
ASSEMBLY INSTRUCTIONS SAFETY WARNINGS 1. This bed is designed for use only mattress (es) meeting the following specifications on the upper bunk, and lower bunk: Upper bunk (bunk bed and tribed included) Bed Type Length Width Thickness Twin Standard 74" - 75" "...
Page 3
ASSEMBLY INSTRUCTIONS 1. At the beginning : Tighten all hardware. Check metal parts for rust. If found, sand and repaint using a non-lead-based paint meeting the requirements of 16 CFR 1303. Check all wood members for deterioration and splinters. Sand down splinters and replace deteriorating wood members.
Page 5
ASSEMBLY INSTRUCTIONS PARTS LITS WF286078 14pcs Bed leg Slats Bed leg Front guard rail support Bed leg Ladder short leg Bed leg Ladder long leg 3pcs Left head board Ladder steps Right head board Slide left leg Back guard rail frame...
Page 10
ASSEMBLY INSTRUCTIONS First attach 2pcs part 11 to the front and end of the frame between headboard. STEP 5 Then attach the remaining part 11 equidistantly between headboard. 11 x14 3-1/8" 3-1/8" Note : Do not lock the screws of the bed slats to the outermost edge of the bed slats, you need to leave a certain space at the edges, otherwise it will cause the board to break.
Need help?
Do you have a question about the WF286078 and is the answer not in the manual?
Questions and answers