Canon EOS 4000D Instruction Manual page 117

Canceling AEB
Follow steps 1 and 2 to turn off the AEB range display.

The AEB setting will be canceled automatically if the power is turned

off, flash recycling is completed, etc.
Shooting Tips
Using AEB with continuous shooting

If continuous shooting <i> (p.100) is set and you press the shutter
button completely, the three bracketed shots will be taken
continuously in this sequence: standard exposure, decreased
exposure, and increased exposure.
Using AEB with single shooting (u)

Press the shutter button three times to take the three bracketed
shots. The three bracketed shots will be taken in the following
sequence: standard exposure, decreased exposure, and increased
exposure.
Using AEB with the self-timer

With the self-timer <j> <l> (p.101), you can take three
continuous shots after a delay of approx. 10 sec. or approx. 2 sec.
With <q> (p.101) set, the number of continuous shots will be three
times the number set.
AEB will not work with flash or bulb exposures.

If [z2: Auto Lighting Optimizer] (p.121) is set to any setting other

than [Disable], the effect of AEB may be reduced.
3 Auto Exposure BracketingN
117