Audio; Schedule; Pip (Picture-In-Picture) - NEC M46B-AVT User Manual

OSD Controls
CLOCK
VGA and RGB/HV input only
CLOCK PHASE
VGA, RGB/HV, DVD/HD
input only
H RESOLUTION
DVI, VGA, RGB/HV
input only
V RESOLUTION
DVI, VGA, RGB/HV
input only
ZOOM MODE
All inputs except for TV
INPUT RESOLUTION
VGA and RGB/HV input only
ADJUST RESET
BALANCE

AUDIO

TREBLE
BASS
PIP AUDIO
LINE OUT
AUDIO RESET

SCHEDULE

OFF TIMER
- continued
Press + to expand the width of the image on the right of the screen.
Press - to narrow the width of the image on the left.
Adjusts the visual "noise" on the image.
Adjusts the horizontal size of the image.
Adjusts the vertical size of the image.
Select the aspect ratio of the screen image.
Choose the zoom method
BASE ZOOM
16:9
HDMI, DVD/HD,
Same aspect ratio as the LCD panel.
VIDEO input only
14:9
HDMI, DVD/HD,
14:9
VIDEO input only
Expands a 4:3 picture to fill the screen in a non-linear (non-proportionate) manner and
DYNAMIC
some of the image will be lost due to expansion. DYNAMIC is the same as FULL size im-
HDMI, DVD/HD,
age when HDTV 1080i signal is input.
VIDEO input only
Selecting "OFF" will display the image in a 1 by 1 pixel format. (If the input resolution is
OFF
higher than a 1920 x 1080 resolution, the image will be scaled down to fit the screen.
Displays an image as large as possible without changing the aspect ratio or cutting off
CUSTOM
part of the image.
ZOOM
Maintains the aspect ratio while zooming.
16:9, 14:9, CUSTOM only
H ZOOM
Amount of horizontal zoom. Can be adjusted for each BASE ZOOM setting.
16:9, 14:9, CUSTOM only
V ZOOM
Amount of vertical zoom. Can be adjusted for each BASE ZOOM setting.
16:9, 14:9, CUSTOM only
H POS
Horizontal position. Can be adjusted for each BASE ZOOM setting.
16:9, 14:9, CUSTOM only
V POS
Vertical position. Can be adjusted for each BASE ZOOM setting.
16:9, 14:9, CUSTOM only
If there is a problem with signal detection, this function forces the monitor to display the
signal at the desired resolution. After selection, execute "AUTO SETUP" if required.
If no problem is detected, the only available option will be "AUTO".
Resets the following settings within the ADJUST menu back to factory setting:
AUTO ADJUST, H POSITION, V POSITION, CLOCK, CLOCK PHASE, H RESOLUTION, V RESOLU-
TION, ZOOM MODE, INPUT RESOLUTION.
Selects source of PIP audio.
Selecting "VARIABLE" will enable to control line out level with VOLUME button.
Resets "AUDIO" options back to factory settings.
Sets the monitor to power off after a length of time between 1 and 24 hours.
English-28