Operation - Ozito PXBHS-600 Instruction Manual

WARNING!
ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Installing A Drill Bit
1. Rotate the chuck collar anti-clockwise to open
the chuck.
2. Insert the drill bit, making sure it
is centred in the chuck.
3. Tighten the chuck by turning the chuck collar
clockwise.
4. Pull on the bit to ensure it is
firmly secured.
Removing A Drill Bit
1. Open the chuck by rotating the
chuck collar anti-clockwise and
remove the drill bit.
WARNING!
DO NOT HANDLE ACCESSORIES
WITHOUT GLOVES AS THEY ARE SHARP & CAN
BECOME HOT AFTER USE, POTENTIALLY CAUSING
INJURY.
b.
a.

OPERATION

2. CONTROLS
Forward/Reverse Button
1. To drill or drive screws, push the forward/reverse button towards the left
of the drill.
2. Push the button towards the right of the tool to reverse the rotation.
REV
FWD
3. Push the button into the centre position to lock the variable speed trigger
and prevent accidental starting.
Variable Speed Trigger
1. Squeeze the variable speed
trigger to start the tool.
Note: The more the variable speed trigger is depressed, the faster the
drill bit will rotate.
2. Release the trigger to stop
drilling.