Relax A Lounger PARKER 1 Manual

Also See for PARKER 1:

Assembly instructions and operating manual (2 pages)

Assembly instructions (2 pages)

Table of Contents

Contents

1 PARTS AND HARDWARE
2 ASSEMBLY INSTRUCTIONS
3 OPERATING YOUR UNIT
4 Documents / Resources
- 4.1 Download manual

Relax A Lounger PARKER 1 Manual

PARTS AND HARDWARE

Avoid using sharp objects such as a knife to cut open packing as you may accidentally damage the upholstery.

Backrest Ear Piece 2x

Backrest 1x

Seat Body 1x

ASSEMBLY INSTRUCTIONS

At least two adults are required to safely complete performing this task.
Other lifting attempts may risk back injury due to large and heavy part(s).

Carefully unpack and place parts on a clean flat surface.
Place the backrest as shown below. Insert backrest metal plates to both arms as shown below.
Insert both backrest ear piece metal plates to both sides of backrest.
Ensure it is correctly in place
Finally, stretch and pull down rear cover evenly before securing velcro strip to seat base. Repeat if necessary for better fit.

OPERATING YOUR UNIT

Converting to Footrest Position

While sitting, simply pull the leveler by using hand to access the footrest position. Footrest will pops up once the leveler pulled out.

Converting To Recliner Position

While sitting, simply push your back to backrest to access the recliner position.

Push down footrest to restore backrest into original position.