Grease Bottom Front & Top Rear Slide Pads - Skyjack SJ1044 THS Service Manual

50 Hour or Weekly Routine Maintenance
Left Extend
Cylinder
Grease Points
Figure 19 Boom Grease Points
5.3-6 Grease Bottom Front & Top Rear
Slide Pads
1. Ensure telehandler is parked on a firm level
surface.
2. Move transmission lever to neutral and engage
park brake.
3. Fully extend the boom to gain access to front
bottom slide pads.
4. Shut down the engine and dismount from cab.
5. With boom fully extended, smear grease along
the path of front bottom slide pads. See figures
below.
SJ1044 TH, SJ1044 THS, SJ1056 TH, SJ1056 THS, SJ1256 THS
Tilt/Comp
Left Boom Pivot
Cylinder
Grease Point
Grease
Points
Figure 20 Front Bottom Slide Pads
6. Fully retract the boom then fully extend it a few
times to ensure the path of slide pads is covered
with grease for maximum protection.
7. With boom fully retracted, remove boom rear
cover door to gain access to top rear slide pads.
8. Smear grease along the path of rear top slide
pads. See figure below.
Rear Top
Slide Pads
Grease Points
Figure 21
Front Bottom Slide Pads
9. Shut down the engine and remove key.
Section 5 – Procedures
Front Bottom
Slide Pads
Grease Points
Boom Rear
Cover
190130AG
157