Table of Contents
Advertisement
On the LIBRARY page you have the possibility to store the Fohhn Dante Firmware locally on your PC.
Then the update can be done without an internet connection
The Dante Firmware update only updates the firmware of the integrated Dante module. The
FOHHN device firmware is unaffected and must, if necessary, be separately updated!
Here you can find all of Audinate's technical documentation relating to Dante:
https://www.audinate.com/resources/technical-documentation
Here you can find some helpful guidance on identifying a Dante device when the IP address is not
known:
https://www.audinate.com/faq/how-can-i-locate-dante-device-static-ip-address-unknown-subnet
3.3.10 Integration into the AIREA-NET
The MA-Series amplifiers are equipped with an AIRE-NET Interface to give the possibility of being
integrated into a FOHHN AIREA system: The AIREA system has its own network for transmitting
supply voltage, digital audio signals (AES/EBU) and FOHHN-NET control signals – the AIREA-NET. The
AES/EBU audio signals are routed to the input channels 3 and 4. For connection to this, an AIREA
BREAK OUT EXTENSION ABX-4 is required.
26
Advertisement
Table of Contents
Need help?
Do you have a question about the MA Series and is the answer not in the manual?
Questions and answers