Starting The Engine - Parker PGBC-5200 Owner's Manual

S TA R T I N G T H E E N G I N E
the product is equipped with a centrifugal clutch mechanism
attachment begins to rotate as soon as the speed of the engine is increased
STEP 1: FILL THE TANK
Remove the fuel cap and fill the tank to no more than
80% capacity.
Fuel should be a mixture of unleaded petrol and 2
stroke oil mixed at a ratio of 40:1 (Unless otherwise
instructed).
14
,
so the cutting
.
Carburettor
STEP 2: PRIME THE CARBURETTOR
Prime the carburettor by repeatedly pressing the
bulb located underneath the air filter housing.
The fuel cap must be secure and tight for the
carburettor to prime.
STEP 3A: CLOSE CHOKE (COLD START)
For cold engine starts, close the choke by sliding the
lever upwards.
STEP 3B: OPEN CHOKE (WARM START)
For warm engine starts, open the choke by sliding the
lever downwards.
15