Makita BAC01 Instruction Manual page 7

ASSEMBLY
CAUTION:
Hold the power converter and the
power source firmly when installing or removing
power source. Failure to do may cause them to slip
off your hands and result in personal injury or damage
to the power converter and the power source.
CAUTION:
Before operation, make sure that
the cord is placed properly and the socket is
inserted into the plug all the way.
Mounting the power source
For PDC1200
Attach the power source to the power converter as
shown in the figure.
CAUTION:
Make sure that the power source
is securely installed to the power converter.
Otherwise it may accidentally fall out of the power
converter and cause injury to you or someone around
you. If you can see the red indicator as shown in the
figure, the power source is not locked completely.
Fig.2
► 1. Red indicator
When removing the power source, lift the power source
up while pushing down the lock button.
Fig.3
► 1. Lock button
For PDC01
Attach the power source to the power converter as
shown in the figure.
1
Fig.4
To remove the power source, perform the installation
procedure in reverse.
7 ENGLISH
1