Direction For Use - Coway MHS-E5010X Owner's Manual

ONIX-MHS-E5010X_eng_081029 2008.10.29 8:48 PM 페이지13

Direction for use

Fill with water before plugging the power cord.
(No water may cause nebulizer malfunction.)
Coins, nails and screws in the reservoir result in the malfunction of the
nebulizer part. Please check before starting. In addition, disconnect the water
tank, drain the water in the reservoir thoroughly and check if the air-cleaning
filter is mounted on the bottom of the appliance.
After initially filling with the water, the humidification starts after approx.
20seconds~4minutes.
Wash the water tank before initial use to spray more comfortable mist.
Filling the water tank through the top water pouring.
❶
Turn the water tank lid anti-clockwise to
`OPEN' to dispatch it from the main
body.
❷
Fill the water by using containers such
as kettles.
● Use clean tap water.
※ Do not use coldwater under 42.8 ℉(6℃) or
warm water over 95℉(35 ℃).
Doing so may cause nebulizer malfunction.
※ The use of undergrounse poor water spray or
appliance failure.
● Fill water to more than half the water
tank but less than the 'MAX' level.
※ If water is lower than half the water tank,
humidification may be delayed.
※ If water is supplied up to the ' MAX' level, the
water will overflow.
● Do not splash water around the water
tank while supplying water.
● After topping up the water, dry the water
tank with a clean cloth.