Table of Contents
Advertisement
1. SAFETY INFORMATION
•
Please keep this manual for future review.
•
This manual contains safety, installation and operation instructions for the Adventure
Kings Plus MPPT Solar Charge Controller / Regulator
•
Carefully read all instructions and warnings in the manual before installation or use.
•
There are no user serviceable components inside the unit. DO NOT disassemble or
attempt to repair the controller.
•
While the unit has an IP33 dust and water-resistant rating, it is designed for use
inside in a protected area. Do not allow water to enter the unit.
•
Install the unit in a well ventilated place. The unit's heat sink may become very hot
during operation.
•
Ensure appropriate fuses are installed when the MPPT is in use.
•
Turn off any connections, including batteries, loads or solar panels before installation
or changes to the wiring setup
•
Ensure power connections remain tight to avoid excessive heat from loose
connections.
•
Maximum solar panel Open Cell Voltage (OCV): 46V @25°C
•
Maximum Input current: 20A
•
Maximum Solar Panel Input: 390W
•
Minimum Battery operating voltage: 8V
2. KIT CONTAINS
•
Adventure Kings Plus 20A MPPT Solar Charge Controller / Regulator
•
2x twin core connection wires with Quick Connect Plugs
•
Temperature Sensor
•
User Manual
V1.7
3
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PLUS AKPSR-MPPT 01 and is the answer not in the manual?
Questions and answers
Can I set a low battery voltage cut off
Yes, you can set a low battery voltage cut off on the Adventure Kings PLUS AKPSR-MPPT 01, but only when the battery type is set to "USE". This allows user adjustment of battery voltage parameters, including low voltage disconnect values.
This answer is automatically generated