Table of Contents
Advertisement
It is not recommended to connect more than one motor to one switch (and vice versa).
The exception is having a switchboard.
WARNING!
All wiring connection diagrams shall be obeyed, otherwise warranty may be voided.
REMOTE CONTROLLER
Manual radio control of one or more RTS drives and/ or radio receivers or a group of
•
RTS drives and/ or radio receivers.
Handling of a single device or a group of devices is possible.
•
Stopping the motion and/ or forcing the motion via a convenient button.
•
Remote controller is equipped with an adjust function which enables, for e.g., intensity
•
of illumination to be adjusted.
A convenient LED indicates that an action was requested by the user and enables
•
selection of a channel in the remote controller (in case of multi-channel remote
controllers).
Wireless, battery powered remote controller(CR 2430 battery).
•
Power supply: 230V - 50Hz.
•
Working temperature: -25ºC / + 70ºC.
•
Protection rating: IP 44.
•
Radio frequency: 433.42 MHz.
•
After installing a roller blind with electric drive, it shall be connected to a previously prepared
wiring and control systems.
Rys.4 Electrical drive with a switch.
7
Advertisement
Table of Contents
