Mounting; Disconnecting Product Manually From Network - Silvercrest SDWZ 1 A1 Quick Start Manual

˜ Mounting
1. Pull protective strip 4 out of
battery compartment 7 .
2. Select position with max. 15 mm
distance between magnet 8 and
sensor 1 .
Mounting surface must be even,
clean and dry.
3. Remove protective film from back
of magnet 8 and sensor 1 .
4. Mount:
– Magnet 8 on door/window
– Sensor 1 on frame
Magnet 8 can be mounted on
left/right of sensor 1 .
˜ Disconnecting product
manually from
network
B
2
Push metal pin 5 into pin hole 9
for 5 s until green LED 2 flashes
quickly (fig. B).
Complete renewed pairing process
within 3 minutes after reset.
6x 5
5 s
9
GB/IE 19