Removing And Replacing The Belts - DR ALL-TERRAIN FIELD and BRUSH MOWER Safety & Operating Instructions Manual

Removing and Replacing the Belts

engine and disconnect the spark plug wire(s).
Important! Use only DR
thoroughly tested and proven for many hours of use.
To Replace the Blade Belt
1. Remove the black belt guard by
unscrewing the black knob,
lifting the cover, and pulling up
and back to remove it.
2. Release the belt tension lever
(Figure 13).
3. Remove the belt from the
pulley (Figure 14), and then drop
it from the engine pulley below
the machine.
4. To mount the belt, follow the
above procedure in reverse.
 
DR ALL-TERRAIN FIELD and BRUSH MOWER Safety & Operating Instructions
WARNING! Before performing any maintenance procedure, stop the

belts on your machine. They have been
Belt Tension Lever
Figure 13
Figure 14
Belt Removed
25