TP-Link Archer BE550 User Manual page 39

Chapter 7
2. Create a new SSID in
network in Password. The value is case-sensitive.
Note: If you change the wireless settings with a wireless device, you will be disconnected when the settings are
effective. Please write down the new SSID and password for future use.
• To hide SSID:
1. Go to Wireless or Advanced
2. Select Hide SSID, and your SSID won't display when you scan for local wireless
networks on your wireless device and you need to manually join the network.
• To change the security option:
1. Go to Advanced >
2. Select an option from the
the default settings unless necessary.
• To change the transmit power:
1. Go to Advanced >
2. Select an option from the
default and recommended setting is High.
• To change channel settings:
1. Go to Advanced >
2. Select a Channel Width
just leave it as default.
3. Select an operating
the channel to Auto
issue.
For the 6 GHz network, you can select the
Scanning Channel) is enabled, only channels with higher connectivity will be reserved
to ensure 6 GHz device connections.
• To change the transmission mode:
1. Go to Advanced >
2. For the 2.4 GHz and 5 GHz networks, disable
Mode according to your wireless client devices. It is recommended to just leave it as
default.
For the Mode of the 6 GHz network, please keep the default settings.
Network Name (SSID)
> Wireless
Wireless > Wireless Settings.
Security drop-down list. We recommend you don't change
Wireless > Wireless Settings.
Transmit Power
Wireless > Wireless Settings.
(bandwidth) for the wireless network. It is recommended to
Channel for the wireless network. It is recommended to leave
if you are not experiencing the intermittent wireless connection
Wireless > Wireless Settings.
and customize the password for the
> Wireless Settings.
drop-down list: High,
Enable PSC checkbox. When PSC (Preferred
Smart Connect, then select a transmission
Wireless Settings
Middle or Low. The
35