Maintenance; Service Notes; Optional Accessories - DeWalt XR DCR016 Original Instructions Manual

EN GLI SH
3. Press and hold one of the desired memory
buttons (f). The station setting begins flashing in
the LCD display (h). Continue to hold the button
down until the flashing stops. The memory
button is now set.
4. Repeat steps 2 and 3 to set the other memory
buttons.
TO PROGRAM THE CLOCK
1. Turn power on (see Power/Volume
Adjustment).
2. Push and hold clock button (e) until the LCD
display (h) begins flashing.
3. Press the left arrow button repeatedly to
increment the hour of the displayed time
or press and hold the button to increment
continuously. Use the right arrow button to
adjust the minute in the same manner.
NOTE: If you do not press a button within
5 seconds, the clock programming feature will
automatically return to the previous setting.
4. Once the time is set, push and hold the clock
button until the time on the LCD display stops
flashing.
TO ADJUST THE EQ
Sound quality can be adjusted by changing the
equalization of the bass or treble of the radio.
1. Press the EQ button (g) to select bass or treble.
2. Press the right arrow button to increase the
selected setting or the left arrow button to
decrease it.
3. Once desired adjustment is achieved, leave
all buttons released for more than 3 seconds.
The procedure will exit and the equalization
adjustment will remain activated.
Important Radio Notes
1. The radio will run up to 8 hours on a fully
charged 4.0 amp hour battery. Using batteries
of lower voltage or capacity will produce less
run time.
2. Reception will vary depending on location and
strength of radio signal.
3. Certain generators may cause background
noise.
4. AM reception will most likely be clearer when
powered by a battery pack.
28
5. To use the auxiliary port (k), plug the output jack
from a CD or iPod */MP3 player into the port
®
(fig. 1). The sound from the external source
plays through the speakers of the DCR016.
* iPod is a registered trademark of Apple Inc.

MAINTENANCE

Your D WALT radio has been designed to operate
E
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper care.

Service Notes

This product is not user serviceable. There are no
user serviceable parts inside the radio. Servicing
at an authorised service centre is required to avoid
damage to static sensitive internal components.
Cleaning
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the radio. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
radio; never immerse any part of the
radio into a liquid.
CHARGER CLEANING INSTRUCTIONS
WARNING: Shock hazard. Disconnect
the charger from the AC outlet before
cleaning. Dirt and grease may be
removed from the exterior of the radio
using a cloth or soft non-metallic brush.
Do not use water or any cleaning
solutions.

Optional Accessories

WARNING: Since accessories, other
than those offered by D
not been tested with this product, use
of such accessories with this radio
could be hazardous. To reduce the risk
of injury, only D WALT recommended
E
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.
WALT, have
E