Dc Power Cord Troubleshooting Guide - O2 Concepts OXLIFE LIBERTY 301-0005 User Manual

DC Power Cord Troubleshooting Guide

Event
Batteries Not
Charging
Low Battery
Alarm
Device Alerting
/ Beeping
Intermittently
Low External
Power Alarm
34
Solution
• If there is no charging icon (lightning bolt symbol), reduce
the device to the lowest setting on either Pulse or
Continuous mode and wait for charging icon to appear.
• It may be possible to increase the flow rate, however
each vehicle's DC power outlet varies in performance
and may limit achieving the desired flow rate.
• If batteries are fully depleted, they may not charge until
the device is powered off. Batteries may require being
charged to a minimum level in order for the lightning
bolt to appear on the display.
• The device will default to the most reliable source
of power to supply oxygen.
• If the DC power drops equal to or below 11.6 volts,
the device will beep. If a battery is installed, the
device will switch to battery power.
• The device will automatically return to DC power once the
vehicle supplies the proper voltage.
• There may be too much of a power draw on the vehicles
electrical system (air conditioning). Try eliminating
power draws.
• Check your vehicle's user manual or consult an auto
technician to determine your vehicle's DC power
amperage and wattage. The device requires 12-volts
(15 amps) to power reliably at all settings.