Before using for the first time
Settings for compartment
The dispensing quantity for
UltraPhase 2 is pre-set for (hard-
ness level II).
Dosage for comp.
Confirm the pre-set value with the OK
sensor, or change the value.
UltraPhase 2
Hardness level I
Hardness level II
Hardness level III
The following appears in the display:
Insert container
Remove the foil or the stopper from
the detergent cartridge.
24
47
46
45
ml
44
43
36 ml
45 ml
54 ml
11:02
Push the UltraPhase 2 detergent
OK
cartridge into compartment 2 until it
locks into position.
As the cartridge is inserted the mes-
sage in the display will change to:
"TwinDos" is set up. Changes can be
made in "Settings" / "TwinDos".
Confirm with the OK sensor.
Close the TwinDos access panel.
The display will then change to the cal-
ibration programme.