Setting Up The Monitor; Installation - Philips 34E1C5600HE/01 User Manual

2. Setting up the
monitor

2.1 Installation

1 Package contents
*HDMI
*USB C-A
*Different according to region
Note
2 Install the base
1. In order to well protect this monitor
and avoid scratching or damaging of
the monitor, keep the monitor face
down in the cushion for the base
installation.
2. Hold the stand with both hands.
(1) Gently attach the base to the
stand.
(2) Use your fingers to tighten the
screw located at the bottom of
the base.
Curved Monitor
5000 Series
34E1C5600HE
Quick start
Register your product and get support at www.philips.com/welcome
Power
*USB C-C
*DP
*USB C-C/A
(3) Use a screwdriver to tighten the
screw located at the bottom of
the base, and secure the base to
the stand tightly.
(4) Gently attach the stand to the
VESA mount area until the latch
locks the stand.
3. After attaching the base, erect
the monitor with both hands on
holding the monitor together with
styrofoam firmly. Now you can pull
out the styrofoam. When you pull
out the styrofoam, do not squeeze
the panel to avoid broken panel.
Warning:
This product is curve design, when
attach / detach the base, place the
protective material under the monitor
and do not press down the monitor to
avoid the damage.
5
4
1
2
3