Cleaning And Care; Cleaning The Interior And Accessories; Ventilation Gaps - Miele F 9122 Ui Operating And Installation Instructions

Make sure that water cannot get into
the electronics.
Never use steam-cleaning
apparatus to defrost or clean the
appliance. Steam could reach the
electrical components and cause a
short circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
To avoid damaging the surface of
your appliance, do not use:
– cleaning agents containing soda,
ammonia, acids or chlorides,
– cleaning agents containing
descaling agents,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– solvent-based cleaning agents,
– stainless steel cleaning agents,
– dishwasher cleaner,
– oven sprays,
– glass cleaning agents,
– hard, abrasive sponges and
brushes, e.g. pot scourers,
– melamine eraser blocks,
– sharp metal scrapers.

Cleaning and care

Before cleaning
^ Switch the appliance off.
^ Switch off at the wall and withdraw
the plug from the socket, or
disconnect the mains fuse or remove
the screw-out fuse in countries where
this is applicable.
^ Take any frozen food out of the
appliance and store it in a cool place.
^ Take out any removable parts, e.g.
shelves, for cleaning.
^ Defrost the freezer.
Cleaning the interior and
accessories
Use warm water with a little washing up
liquid. Wash all accessories and
drawers by hand only. Do not wash in a
dishwasher.
^ After cleaning, wipe the interior and
accessories with a damp cloth, and
dry with a soft cloth. Leave the door
open to air the appliance for a short
while.

Ventilation gaps

^ The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build-up
of dust will increase the energy
consumption of the appliance.
25