Owner's Manual - KitchenAid 5K5THSBP Owner's Manual

Stainless steel bowl
Table of Contents

Advertisement

PRODUCT SAFETY
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed. Please refer to the basic Important
Safeguards as outlined in the Owner's Manual included with
your Stand Mixer.
SAVE THESE INSTRUCTIONS
For complete details on product information, instructions and videos, including Guarantee
information, visit www.KitchenAid.co.uk or www.KitchenAid.eu. This may save you the cost
of a service call. To receive a free printed copy of the information online,
PRODUCT ASSEMBLY
ATTACHING THE STAINLESS STEEL BOWL
Before First Use
Your Stand Mixer is individually adjusted at the factory for optimal performance. When using
the Stainless Steel Bowl, it may be necessary to readjust the beater-to-bowl clearance. Please
refer to the Stand Mixer Owner's manual for complete information on adjusting the beater-to-
bowl clearance, or call 00 800 3810 4026, Monday through Friday, where we would be happy
to assist you in making this adjustment.
IMPORTANT: Before use, wash with hot, soapy water; rinse and dry thoroughly. It is not
necessary to season the Stainless Steel Bowl before use.
NOTE: This Stainless Steel Bowl is designed to fit all 4.3 and 4.8 Litre Tilt-Head Stand Mixer
models except model KN15E1X. Follow these Owner's to attach the Stainless Steel Bowl to
your Stand Mixer.
1.
Turn the Stand Mixer OFF (0) and unplug.
2.
Unlock and lift the Motor Head. Then, lock
3.
Place the bowl on the clamping plate to secure in place.
4.
Attach the appropriate accessory for your recipe, using the directions in the Stand Mixer
Owner's Manual. Then place the Motor Head back in the down position and lock into
place.
PRODUCT DISASSEMBLY
REMOVING THE STAINLESS STEEL BOWL
1.
Turn the Stand Mixer OFF (0) and unplug.
2.
Raise the Motor Head: Unlock and lift the Motor Head. Then, lock
lifted.
3.
Remove the Accessory: Press the accessory upward, turn it and pull it away from the
Beater Shaft.
*Locking option is available on select models.
2
call 00 800 381 040 26.
the head to keep it lifted.
*
the head to keep it
*

Advertisement

Table of Contents
loading

This manual is also suitable for:

5ksm5ssb

Table of Contents