Setting Up
Lens Shift Function
By shifting the lens, the position of the image on the screen can be moved up and down.
1
Press the lens shift knob to extract
the knob so that it protrudes from the
projector.
To move the image up
Turn the lens shift knob clockwise.
Up
Overhead Installation
• When fitting the projector to the ceiling, a ceiling attachment (optional) and ceiling unit flange pipe set (available on the market)
are necessary.
• The ceiling unit flange pipe set (pipe length) required differs according to the installation height. Consult the store where
purchased.
• Consult the store where purchased regarding installation work. A charge will be made for this work.
Warning
• Place at least 20cm away from the wall. Do not set up where ventilation is poor as this may lead to fire.
• Do not place on a carpet or blanket as this may block the suction inlet on the bottom of the projector.
Do not block the lamp ventilation holes as this may lead to fire.
En-16
(continued)
2
Turn the lens shift knob to adjust the
position of the image.
3
After adjustment, press the lens shift
knob to withdraw it to its original
position.
To move the image down
Turn the lens shift knob anticlockwise.
Down