SolaX Power X1 Series User Manual page 59

Troubleshooting
Number
Manager EEEPROM Fault.
• Shut down photovoltaic, battery and grid, reconnect.
IE 103 Mgr EEPROM Fault
•
DSP version error.
DSPunmatched
IE 104
•
•
NTC invalid
•
IE 105 NTC Sample Invalid condition.
•
•
Battery
temp
low
•
Bat Temp Low
IE 106
dissipation.
•
Battery
temp
high
•
Bat Temp High
IE 107
dissipation.
•
Meter error
IE 109 Meter Fault •
•
Bypass relay fault
BypassRaleyFault
IE 110 • Press the ESC" key to restart the inverter.
•
Battery Error - External Communication Fault
BE 001 BMS_External_Err
•
Battery Error - Internal Communication Fault
BMS_Internal_Err
BE 002
•
Over voltage in battery system
BE 003 BMS_OverVoltage
•
Low voltage in battery system
BMS_LowerVoltage
BE 004
•
Battery fault - over charge fault
BMS_ChargeOCP
BE 005
• Please contact the battery supplier.
Battery fault-discharge over current fault
BMS_DischargeOCP
BE 006
• Please contact the battery supplier.
Over temperature in battery system
BE 007 BMS_TemHigh
•
Battery temperature sensor malfunction
BMS_TempSensor Fault
BE 008
•
112
Or seek help from the installer if it can not return to normal.
Check that the DSP1 version matches
Or seek help from the installer if it can not return to normal.
Make sure the NTC is properly connected and the NTC is in good
Please confirm that the installation environment is normal
Or ask for help from the installer, if it
can
not
return
to normal.
Check the battery installation environment to ensure good heat
Or ask for help from the installer, if it can not return to normal.
Check the battery installation environment to ensure good heat
Or ask for help from the installer, if it can not return to normal.
Please check that the instrument is working properly.
Or seek help from the installer if it can not return to normal.
.
Or ask for help from the installer if it
can
not
return
to
normal.
Please contact the battery supplier.
Please contact the battery supplier.
Please contact the battery supplier.
Please contact the battery supplier.
Please contact the battery supplier.
Please contact the battery supplier.
Number
Battery Unbalanced Failure
BMS_CellImblance
BE 009
• Please contact the battery supplier.
Battery hardware protection failure
BE 010 BMS_Hardware Protect
Please contact the battery supplier.
•
Battery circuit failure
BE 011 BMS_Circuit_Fault • Restart the battery
• Please contact the battery supplier.
Battery insulation failure
BMS_ISO_Fault
BE 012 • Check that the battery is properly grounded and restart the battery
Please contact the battery supplier.
•
Battery voltage sensor fault
BE 013 BMS_VolSen_Fault
• Please contact the battery supplier.
Temperature sensor failure
BMS_TemppSen_Fault • Restart the battery.
BE 014
• Please contact the battery supplier.
Battery current sensor fault
BMS_CurSensor Fault
BE 015
• Please contact the battery supplier.
Battery relay failure
BMS_Relay Fault
BE 016
Please contact the battery supplier.
•
Battery type failure
BMS_Type_Unmatch
BE 017 • Upgrade the battery BMS software.
• Please contact the battery supplier.
Battery version mismatch failure
BE 018 BMS_Ver_ Unmatch • Upgrade the battery BMS software.
• Please contact the battery supplier.
Battery
manufacturer did not match the fault
BMS_MFR_ Unmatch • Upgrade the battery BMS software.
BE 019
• Please contact the battery supplier.
Battery hardware and software mismatch failure
BMS_SW_ Unmatch
BE 020 • Upgrade the battery BMS software.
Please contact the battery supplier.
•
Battery master slave control mismatches
BE 021 BMS_M&S_ Unmatch • Upgrade the battery BMS software.
• Please contact the battery supplier.
Battery charging request does not respond to a fault
BMS_CR_ NORespond • Upgrade the battery BMS software.
BE 022
• Please contact the battery supplier.
Battery slave software protection failure
BE 023 BMS_SW_ Protect • Upgrade the battery BMS software.
• Please contact the battery supplier.
Battery fault-discharge over current fault
BE 024 BMS_536_Fault
• Please contact the battery supplier.
Over temperature in battery system
BE 025 BMS_SelfcheckErr
• Please contact the battery supplier.
Troubleshooting
.
.
113