Table of Contents
Advertisement
Erasing saved data
1
Press the
•
The power will turn off automatically if the massage does not start within 3 minutes after turning on the power.
2
Press the button corresponding to the settings you wish to delete.
Only the button pressed will illuminate.
3
Confirm the program selection buttons flash.
4
Press the same button again and hold for 3 or more seconds.
The pressed button will flash.
5
Press the button once again while it is flashing (for approximately 15 seconds).
The change from flashing to steady indicates that the deletion is complete.
EP30004.indb
40
button to turn on the power.
40
2007/06/22
13:49:31
Advertisement
Table of Contents
