www.witeg.de
6 Job description
Attention!
When knob for speed adjustment is not set to "0", the impeller starts turning after
switching the device on.
1. Switch the device on.
2. Adjust speed.
7 Maintenance and cleaning
Please read the whole safety instructions before you start to maintain or clean the
device.
Pull the power plug out of the electrical outlet.
Only use care cleaning agents and soft cleaning rags.
Organic lotions, strong chemicals and rough cleaning rags can damage the device.
If you not want to use the device for a long time, pull of the power plug and keep it dry in
the package.
Only use original spare parts.
8 Technical data
Stirring capacity (H
Max. viscosity (mPas)
Motor rating (input / output)
Maximum torque (Ncm)
Max. shaft diameter (mm)
Speed range (rpm)
Ambient Temp.
Range (°C)
Operating
environment
Max. Permissible
Humidity (%)
Safety device
Dimension (w×d×h mm)
Weight (kg)
Others
Power supply
witeg Labortechnik GmbH, WiseStir
O)
2
®
HS-A Overhead Stirrer
11
HS-50A
max. 10 Lit.
10.000
83 / 75 W
85
10
0 - 3.000
0 - 40
80
over load & heat protection for motor
90×145×180
4,5
smooth start and change of stirring speed
AC 230 V, 1N~, 50/60 Hz
HS-120A
max.20 Lit.
50.000
130 / 120 W
145
5,3