Step 3. Establish A Network Connection - Sharp AQUOS LC-43N6100U Quick Start Manual

STEP 3. Establish a network connection
>
1.Press the button on the remote control and then press to enter the Settings menu.
2.Select Network → Network Configuration.
TV JACK
IP Sharer (Router)
External Modem
(with DHCP server)
(ADSL / VDSL / Cable TV)
LAN
LAN Cable LAN Cable Modem Cable
Establish a wired network connection
Automatically obtain an IP address
1.Select Ethernet. The TV will automatically obtain an IP address and connect to the network.
NOTE: The default option of IP Setting Mode is DHCP.
2.If the connection fails then "Disconnected" will display for the Ethernet status. Retry or select Manual to input the information again.
Manually enter the IP address
1.Select Manual.
2.Enter the IP Address, Subnet Mask, Default Gateway, Preferred DNS and Alternative DNS in the menu. Next, select Connect.
10