Dukane Infinity Series User Manual page 39

4. Remove the transducer door as shown in Fig. 4-27.
5. With the stack at the angle shown in Figure 4-28, rest the booster mounting ring on the block or pin of the stack
housing (highlighted in yellow).
6. Brace the stack at point 1 and swing the stack to a vertical position at point 2 as shown in Figure 4-28. The ultrasound
contact button on the transducer should snap under the electrical contact leaf of the housing.
Figure 4-27 Removing Transducer Door
403-618-03 Infinity™ Series Servo Ultrasonic Press Systems User Manual
Figure 4-28 Inserting Stack
2
1
34