Makita CG100D Instruction Manual page 11

NOTICE:
Be sure to check the package for dam-
age before installation. Using the damaged pack-
age may cause malfunction.
Installing film type package to holder
1. Pull the rod handle backward slowly until it stops.
Fig.19
► 1. Rod handle
2. Insert the package into the holder.
3. Attach the rubber ring, nozzle, and holder joint (as
a cap). Fasten the holder joint (as a cap) firmly.
3
5 4
Fig.20
► 1. Holder 2. Film package 3. Rubber ring 4. Nozzle
5. Holder joint (as a cap)
4. Push the rod gently until the piston touches the
package.
To remove the package, remove the holder joint (as a
cap), nozzle, rubber ring, and then push the rod handle
forward until it stops.
1
1
2
Direct filling
1. Push the rod handle all the way until it stops.
Fig.21
► 1. Rod handle
2. Insert the tip of the holder into the caulking mate-
rial, and then pull the rod handle slowly to fill the holder
with the caulking material.
1
Fig.22
► 1. Holder
3.
Attach the rubber ring, nozzle, and holder joint (as
a cap). Fasten the holder joint (as a cap) firmly.
4 3 2
Fig.23
► 1. Holder 2. Rubber ring 3. Nozzle 4. Holder joint
(as a cap)
11 ENGLISH
1
1