Dial And Buttons - Electrolux EN2F5842CB User Manual

14 www.electrolux.com

8. DIAL AND BUTTONS

8.1 Introduction
The options/functions are
not available with all
washing programmes.
Check the compatibility
between options/functions
and washing programmes in
the "Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set incompatible options/
functions.
8.2 Extra Rápido
This option may be advisable to shorten
the washing programme.
Use this option for items with normal or
light soil or items to refresh.
Touch this button once to decrease the
duration.
In case of smaller load, touch this button
twice to set an extra quick programme.
After each touching the new programme
duration is shown on the display. The
relevant indicator illuminates. This option
is not available for every programme. For
more details, refer to Programme options
compatibility in "Programmes" chapter.
8.3 Inicio Diferido
With this option you can delay the start of
a programme to a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases in
steps of 1 hour up to 20 hours.
After touching the Inicio/Pausa
button, the relevant indicator illuminates
and the selected delay time and the
appliance begins the countdown. The
door is locked.
8.4 Inicio/Pausa
Touch the Inicio/Pausa
start, pause the appliance or interrupt a
running programme.
8.5 Pre-lav.
With this option you can add a prewash
phase to a washing programme.
The relevant indicator illuminates.
• Use this option to add a pre-wash
8.6 Centrif.
When you set a programme, the
appliance automatically sets the
maximum spin speed allowed except
programme Denim.
Push this button to set additional spin
options:
• Decrease the spin speed. The
• No spin
• Rinse hold
button to
• Silencioso
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust, mud and other
solid particles.
This option can increase the
programme duration.
display shows only the spin speeds
available for the set programme.
comes on display.
Set this option to deactivate all spin
phases. The appliance performs only
the draining phase of the selected
washing programme. Set this option
for very delicate fabrics. The rinse
phase uses more water for some
washing programmes
. The related indicator
comes on.
The final spin is not performed. The
water of the last rinse is not drained
out to prevent the fabrics from
creasing. The washing programme
ends with water in the drum.
The door stays locked and the drum
turns regularly to reduce creasing.
You must drain the water to unlock
the door.
If you touch the Inicio/Pausa
button, the appliance performs the
spinning phase and drains the water.
. The related indicator
comes on.