1. Manuals
  2. Brands
  3. AJAX Manuals
  4. Security Sensors
  5. GlassProtect Fibra
  6. User manual

AJAX GlassProtect Fibra User Manual

Hide thumbs Also See for GlassProtect Fibra:
Table of Contents

Advertisement

Quick Links

Download this manual
GlassProtect Fibra User Manual
GlassProtect Fibra is a wired glass break detector. Designed for indoor use.
Supports connection of a third-party detector with a normally closed (NC)
contact type.
The detector is compatible with
other
hubs radio signal range extenders ocBridge Plus uartBridge
,
control panels is not provided.
GlassProtect Fibra works as part of the Ajax security system, exchanging data
with the hub using the secure Fibra wired protocol. The communication range is
up to 2,000 m when connected via twisted pair U/UTP cat.5.
GlassProtect Fibra is part of the wired Fibra devices line. The installation, sale,
and con guration of these devices are performed only by accredited Ajax
partners.
Buy GlassProtect Fibra
Updated November 4, 2022
Hub Hybrid (2G)
and
,
Hub Hybrid (4G)
. Connection to
,
, and third-party

Advertisement

Table of Contents
loading

Related Manuals for AJAX GlassProtect Fibra

Summary of Contents for AJAX GlassProtect Fibra

  • Page 1 Fibra wired protocol. The communication range is up to 2,000 m when connected via twisted pair U/UTP cat.5. GlassProtect Fibra is part of the wired Fibra devices line. The installation, sale, and con guration of these devices are performed only by accredited Ajax partners.

  • Page 2: Functional Elements

    Functional elements 1. GlassProtect Fibra glass break detector. 2. Detector microphone slot. 3. LED indicator. 4. Detector enclosure rear panel. Used as a fastener. 5. Perforated part of the enclosure. Triggers a tamper in case of any attempt to detach the detector from the surface. Do not break it off.
  • Page 3 GlassProtect Fibra will not react on a break if a lm is glued to the glass: anti-shock, sun- protective, decorative, or other. To detect the break of such glass, we recommend using...
  • Page 4 To monitor connection with the system devices and display their statuses in the Ajax apps, the protocol involves regular device polling by the hub with an interval of 12 to 300 seconds.

  • Page 5: Selecting The Installation Site

    Ajax app. The Device Number corresponds to the loop (zone) number. Selecting the installation site GlassProtect Fibra is mounted on a vertical surface with the bundled screws. All the necessary holes for fastening in the enclosure have already been made. The detector is intended for indoor installation only.
  • Page 6 In places where objects or structures can interfere with the passage of sound to the detector. For example, in places where the curtains will be between the window and the GlassProtect Fibra. This may prevent the detector from registering glass breakage.

  • Page 7: Detection Zone

    Check the Fibra signal strength before nal installation of the detector. If the signal strength is as low as one or zero bars, we cannot guarantee stable operation of the device. Detection zone When choosing a place to install the detector, run a Detection zone test to check the operation of the device and determine the sector in which the detector...
  • Page 8 Topologies Currently, Ajax security systems support two topologies: Beam (Radial wiring) and Ring. Connecting devices using a Ring topology will be implemented in the next OS Malevich updates. Hardware update of Hub Hybrid is not required. Beam connection (Radial wiring) occupies one bus output of the hub. In the event of a line break, only the segment that remains physically connected to the hub will function.
  • Page 9 Both topologies can be used on the same hub. For example, you can use 2 ring and 4 beam (Radial wiring) connections on the same control panel.  Different types of devices can be connected to a single Fibra line. For example, you can connect opening detectors, motion detectors with photo veri cation support, sirens, and keypads to the same line. ...

  • Page 10: Additional Information

    If you use a different type of cable, the communication range for wired connections may vary. No other types of cables have been tested. Veri cation using a calculator To make sure that the project is calculated correctly, and the system will work in real practice, we have developed a communication range calculator of Fibra lines progress).

  • Page 11: Cable Routing

    Try to avoid any deviations from the security system design. Violation of the basic installation rules and the recommendations of this manual may lead to incorrect operation of GlassProtect Fibra. Check the cables for bends and physical damage before routing. Replace the...

  • Page 12: Installation And Connection

    Installation and connection Before installing GlassProtect Fibra, make sure that you have selected the optimal detector location and that it meets the requirements of this manual. Cables must be hidden and located in a place that is di cult for burglars to access to reduce the likelihood of sabotage.
  • Page 13 GlassProtect Fibra enclosure is not designed for crimped wire connection. Connection of GlassProtect Fibra to the hub 1. Turn off the hub. Disconnect the external power and the hub backup battery. 1 — External power. 2 — Backup battery.
  • Page 14 1 — For cable output through the wall. 2 — For cable output from the bottom of the detector. 5. If the break detector is not the last in the connection line, prepare a second cable in advance. The ends of the wires of the rst and second cables that will be inserted into the terminals of the device should be tinned and soldered together.
  • Page 15 10. Connect the backup battery and external power supply to the hub. Turn on the hub. Add GlassProtect Fibra to the system 12. Perform a test of Fibra signal strength . The recommended signal strength is two or three bars.

  • Page 16: Adding To The System

    3. Make sure that the hub is on and has Internet access via Ethernet and/or mobile network. You can do this in the Ajax app or by looking at the LED on the hub board. It should light up white or green.
  • Page 17 How to add GlassProtect Fibra To add a detector manually 1. Open the Ajax PRO app . Select the hub you want to add GlassProtect Fibra 2. Go to the Devices  tab and click Add device. 3. Set the name of the detector.
  • Page 18 To add a detector:  1. Select the device from the list. 2. Create a name. 3. Specify a room and a security group (if the Group mode is enabled). 4. Press Add. If the detector connects to the hub successfully, it will disappear from the list of available detectors.
  • Page 19 GlassProtect Fibra only works with one hub. When connected to a new hub, the detector stops sending commands to the old one. Once added to a new hub, GlassProtect Fibra is not removed from the list of devices of the old hub. This must be done through the Ajax app.

  • Page 20: Functionality Testing

    1 — External power. 2 — Backup battery. 3. Remove the front panel of GlassProtect Fibra. 4. Run the cable from the wired detector into GlassProtect Fibra enclosure. 5. Connect the wired detector to GlassProtect Fibra terminals. NC — connection terminal.
  • Page 21 This means that the alarm on break is registered. You can also play this audio le to imitate the breaking of glass. Icons The icons display some of GlassProtect Fibra states. You can check them in the Ajax app in the Devices tab. Icon Value...
  • Page 22 The external contact of GlassProtect Fibra detector (a third-party wired detector) is on. Learn more GlassProtect Fibra is temporarily deactivated. Learn more GlassProtect Fibra has been deactivated because the number of alarms was exceeded. Learn more GlassProtect Fibra has been deactivated by timer. Learn more GlassProtect Fibra tamper triggering events are temporarily deactivated.
  • Page 23 States The states include information about the device and its operating parameters. GlassProtect Fibra states can be found in the Ajax app: 1. Go to the Devices tab. 2. Choose GlassProtect Fibra from the list. Parameter Value Detector temperature. Measured on the processor and changes gradually.
  • Page 24 Delay When Entering, sec The Delay When Entering in GlassProtect Fibra only applies to the connected wired detector. Learn more Delay time when leaving: 5 to 120 seconds.
  • Page 25 Delay when leaving (arming delay) is the time the user has to leave the premises after arming. Night Mode Delay When Leaving, sec The delays for GlassProtect Fibra only apply to the connected wired detector. What Is Delay When Leaving...
  • Page 26 The number of the Fibra line the device is Bus No. connected to. Settings To change GlassProtect Fibra detector settings in the Ajax app: 1. Go to the Devices tab 2. Choose GlassProtect Fibra from the list. 3. Go to Settings by clicking on the gear icon 4.
  • Page 27 Delay when entering (alarm activation delay) is the time the user has to disarm the security system after entering the premises. The Delay When Entering in GlassProtect Fibra Night Mode Delay When Entering, sec only applies to the connected wired detector.
  • Page 28 Delay when leaving (arming delay) is the time the user has to leave the premises after arming. The delays for GlassProtect Fibra only apply to the connected wired detector. The setting is displayed if the option Arm in Night Mode is enabled.
  • Page 29 Detection Zone Test operation of a third-party wired detector, and determine the optimal installation location. Learn more Opens GlassProtect Fibra user manual in the User Guide Ajax app. Temporary Deactivation Allows the user to deactivate the device without removing it from the system.
  • Page 30 The feature is used, for example, in stores, to notify employees that someone has entered the building.  Chime is set in two stages: setting up opening detectors and setting up sirens. In GlassProtect Fibra, chime only works with the connected normally closed detectors. Learn more Detector settings 1.

  • Page 31: Led Indication

    Malfunctions If a hub identi es a detector fault (for example, there is no connection with the hub via the Fibra protocol), the Ajax app will display a fault counter in the upper left corner of the device icon. All faults can be seen in the detector states. Fields with malfunctions will be highlighted in red.

  • Page 32: Maintenance

    Warranty for the Limited Liability Company “Ajax Systems Manufacturing” products is valid for 2 years after the purchase. If the device does not function correctly, please contact the Ajax Technical Support rst. In most cases, technical issues can be resolved remotely.
  • Page 33 User Agreement Contact Technical Support: e-mail Telegram Subscribe to the newsletter about safe life. No spam Email Subscribe...

Table of Contents