Replacing the Palm Rest
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the headset port into the slot on the palm rest and align the screw
holes on the system board with the screw holes on the palm-rest
assembly.
2
Replace the screws that secure the system board to the palm-rest
assembly.
Post-requisites
1
Replace the
status-light
2
Replace the
power-adapter
3
Replace the
display
4
Replace the speakers.
5
Replace the
I/O
6
Replace the
heat
7
Replace the
base
8
Replace the keyboard.
9
Replace the fan.
10 Follow the procedure from step 3 to step 5 in replacing the
11 Replace the battery.
12 Replace the
base
Computer. After working inside your
board.
port.
assembly.
board.
sink.
frame.
cover.
After Working Inside Your
hard
drive.
75