Samsung DF10A9500CG User Manual page 9

• Before using, make sure there is dedicated, grounded electrical-outlet rated for use with this product. It
is the owner's responsibility to replace a standard 2-prong wall outlet with a standard 3-prong outlet.
• To avoid electric shock, properly ground the product that conforms to all governing codes and
ordinances. Follow the instructions in the user manual.
• The product must be plugged into its own individual electrical outlet which has a voltage rating that
matches the rating plate. This provides the best performance and also prevents overloading house
wiring circuits which could cause a fire hazard from overheated wires.
• Connect to a properly rated, protected, and sized power circuit to avoid electrical overload. Improper
power circuits can melt, creating electric shock or fire.
• Do not, under any circumstances, cut or remove the ground prong from the power cord. To prevent
personal injury or product damage, the electrical power cord must be plugged into a properly grounded
outlet.
• Do not use a multi socket outlet which is not properly grounded (portable). Upon using a properly-
grounded multi socket outlet (portable), use a product with the current capacity of 15 A or higher alone.
Failure to do so may result in electric shock or fire due to the heat of multi socket outlet. The power may
be shut off when the circuit breaker is operated.
• The product must be connected to a grounded metal, permanent wiring system or an equipment-
grounding conductor must be run with the circuit conductors and connected to the equipment-
grounding terminal or lead on the appliance. Electric shock can result if the product is not properly
grounded.
• Improper connection of the equipment grounding conductor can result in electric shock. Check with a
qualified electrician or service person if you are in doubt that the product is properly grounded.
Untitled-4 9
SAVE THESE INSTRUCTIONS
English 9
2021-07-16 11:50:00