Flight Mode - SYMA X660 User Manual

3.3 Flight Mode

Trimming
Trimming forwards and backwards
If the drone automatically moves forward/backward while hovering, during hovering you can adjust the
movement by holding down the left joystick and push the right joystick to the opposite direction
(backward/forward). Continue adjusting until the drone is stable, then release the fine-tuning button.
Trimming left and right
If the drone automatically fly to the left/right while hovering, during hovering you can hold down the
left joystick and push the right joystick to the right/left direction to adjust the drone's flight until it
stabilizes. Then you can release the trim button.
Trimming left and right rotation
If the aircraft automatically rotate to the left/right while hovering, during hovering you can hold down
the left joystick and push the left joystick to the right/left direction to make adjustments. When the
drone is stable, you can release the trim button.
The end with the red light is the front.
The end with the red light is the front.
The end with the red light is the front.
Rotate left Rotate right
Rear
10