Sharp Mobilon HC-4000 Operation Manual page 51

Notes on field mapping when sending data to a ZR Series unit
PC files are sent as they are without any conversion. For Contacts data, the
following rules apply:
Contacts data on the unit is converted to Contact1 data on the ZR Series unit.
Restrictions on data sizes differ between the two units. On your unit, there is a
field size limit. On the ZR Series unit, the record size must be less than 2048
bytes but there is no limit on the field size. When data is received on the ZR
Series unit, data exceeding the 2048 byte limit is truncated.
Since the name information on your unit is stored in several fields, they are
mapped into one single field on the ZR Series unit as follows:
Your unit
Mr/Ms/Dr
Suffix
First
Middle
Last
Your unit uses more fields in storing address information than the ZR Series
unit. Therefore the fields are mapped as follows:
Your unit
Street
City
State
ZIP
Country
The Name field on the ZR Series unit is always required. If this field is empty,
then the ZR Series unit will store it as Untitled.
ZR Series unit
Mr/Ms/Dr/[SP]First[SP]Middle[SP]Last[SP]Suffix
ZR Series unit
Street[CR]
City,[SP]State[SP]ZIP[CR]
Country
49