Related Manuals for Dreame H12 S
Summary of Contents for Dreame H12 S
- Page 1 Wet and Dry Vacuum User Manual The illustrations in this manual are for reference only. Please refer to the actual product.
-
Page 2: Table Of Contents
Safety Information THANK YOU Important Safety Instructions FOR PURCHASING THIS DREAME For Household Use Only WET AND DRY VACUUM. • Please read this manual carefully before use and retain it for future reference. • When using an electrical appliance, basic precautions should always be followed, including the following: •... -
Page 3: Safety Information
We, Dreame Trading (Tianjin) Co., Ltd., hereby, declares that this equipment is in compliance with the applicable Directives and European Norms, and amendments. The full text of the EU declaration of conformity is available at the following internet address: https://global.dreametech.com... -
Page 4: Product Overview
Product Overview Product Overview Packing List Vacuum Self-Cleaning Button Suction Button On/Off Switch LED Display Screen Clean Water Tank Release Button Voice Prompt Button Charging Base Handle Main Body Clean Water Tank Used Water Tank Release Button Used Water Tank Brush Roller Cover Release Buttons Power Adapter... - Page 5 Product Overview Product Overview Brush Assembly Display Screen Rear Wheel Self-Cleaning Auto Mode Suction Mode Battery Status Indicator Front Wheel Battery Level / • Green: battery level > 20% Error • Orange: battery level ≤ 20% Brush Roller Blocked Tube Clean Water Tank Blinking orange: clean water tank empty...
-
Page 6: Installation
Installation Charging Accessory Holder Installation Note: Fully charge the vacuum before first use. 1. Place the charging base on the level ground against a wall. Connect one end of the Install the accessory holder into the charging base as indicated. power adapter to the charging base and another end to a power outlet. -
Page 7: How To Use
How to Use How to Use Filling the Clean Water Tank Starting Cleaning 1. Press the clean water tank release 2. Remove the cover of the clean water Briefly press the button to power on, and the vacuum will start cleaning. The vacuum button and pull the tank outwards to tank and fill the tank with clean water. -
Page 8: Care & Maintenance
Care & Maintenance Care & Maintenance Cleaning the Brush Roller Cover Tips: 1. Turn off the vacuum before care and maintenance. 2. Replace parts if needed. The parts must be replaced by those available from the * Clean it as needed. manufacturer or its service agent. - Page 9 Care & Maintenance Care & Maintenance Cleaning the Brush Roller Cleaning the Used Water Tank * Clean it as needed. Replacing every 3 to 6 months is recommended. * Cleaning the used water tank after each use and before and after enabling the self-cleaning function is recommended.
-
Page 10: Faq
Care & Maintenance Cleaning the Filter Error Possible Cause Solution * Replace it every 3 to 6 months. 1. Remove the filter from the top of the 2. If the filter is dirty, rinse it with clean The handle is not installed in Re-install the handle. -
Page 11: Troubleshooting
Troubleshooting If the vacuum is not working properly, the screen display will show an error message. Error Possible Cause Solution Please refer to the troubleshooting table to find your solution. Error Icon Possible Cause Solution Insufficient water in clean The battery Fill the clean water tank. - Page 12 You are required to retain any parts of the Dreame H12 S Wet & Dry your original proof of purchase for any claims 1. Remove the handle, decorative ring in the middle of the appliance and screw plugs.
- Page 13 • The word "dreame" is the abbreviation of Dreame Technology Co., Ltd. and its subsidiaries in China. It is the transliteration of the company's Chinese name " 追觅 ", which means striving for excellence in every endeavor and reflects the company's vision of continuous pursuit, exploration and search in technology.
Need help?
Do you have a question about the H12 S and is the answer not in the manual?
Questions and answers