Samsung SCC-B2305 User Manual page 5

Auto Iris Lens Control Cable
This cable transmits the control signal from the camera to control the lens
shutter.
E
Back Focus Control Bar
It controls the back focus.
ALC Lens Setting Switch
This switch sets the Auto Iris lens type for use.
DC : When you attach an Auto Iris lens requiring the DC control signal,
please put this switch in the DC position.
VIDEO : When you attach an Auto Iris lens requiring the video control
signal, please put this switch in the VIDEO position.
SCC-B2305(P) Rear View
8
SCC-B2005P Rear View
Power Display LED
When the camera is supplied with power, LED is on.
Video Output Terminal
The monitor video input terminal is connected with this terminal through
which the camera video signal comes out.
Remote Input Terminal(RS-232)
This terminal is used for camera control at the production plant.
1 2 3 4
AC 220-240V
1 TXD
2 RXD
3 +5V
4 GND
9
E