Table of Contents
Advertisement
Cleaning and care
Clean the niche of the brew unit with
a damp, clean cloth. Clean the areas
marked in white in the illustration,
e.g., around the drive shaft,
especially well.
Inserting the brew unit
To insert, follow the instructions for
removal in reverse order: push the
brew unit back into the coffee
machine. Tilt the brew unit forward a
little when doing this.
Press the button under the handle of
the brew unit and, while doing so,
turn the handle backward .
76
Tip: If you are unable to turn the brew
unit handle, apply firm pressure to the
sides of the brew unit.
Push the water container into the
coffee machine.
The process of removing and inserting
the brew unit causes ground coffee to
drop into the drip tray.
Remove the drip tray and clean the
lid.
Push the drip tray back into the
coffee machine.
Close the appliance door.
Cleaning the interior, inside of
the appliance door, and drip
tray
Clean the interior and appliance front as
part of the normal cleaning process. For
instance, if you remove the water
container, use this as an opportunity to
clean the area under the water
container at the same time.
The drip tray is located at the bottom on
the inside of the appliance door.
Advertisement
Table of Contents
