Replacing The Rubber Feet; Procedure; Post-Requisites - Dell Inspiron 24 3452 Service Manual

Replacing the rubber feet

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Align the screw holes on the rubber feet with the screw holes on the
display bezel.
2 Replace the screws that secure the rubber feet to the display bezel.

Post-requisites

1 Replace the display
2 Replace the control-buttons
3 Replace the speakers.
4 Replace the speaker
5 Replace the VESA-mount
6 Replace the system
7 Replace the camera.
8 Replace the microphone.
9 Replace the fan.
10 Replace the heat
11 Replace the wireless
12 Replace the memory
13 Replace the hard
14 Replace the optical
15 Replace the back
16 Replace the stand
76
computer. After working inside your
assembly.
board.
cover.
bracket.
board.
sink.
card.
module.
drive.
drive.
cover.
assembly.
After working inside your